home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
EnigmA Amiga Run 1996 June
/
EnigmA AMIGA RUN 08 (1996)(G.R. Edizioni)(IT)[!][issue 1996-06][EARSAN CD VII].iso
/
earcd
/
comm1
/
portstts.lha
/
Sysop.Doc
< prev
Wrap
Text File
|
1996-04-08
|
3KB
|
87 lines
$VER:PORTStatus_Version_5.1 - LogOn Utility for Amiga CNet/3/4 PRO
------------------------------------------------------------------
Postcard Ware: Please, if you like this program and use it, send me
a postcard...
Michael Rudolph
P.O.Box 118
Forreston, TX
76041-0118
Copyright (c) 1996 Star Streams
You may edit this file for your own use but do not redistribute it
if you have changed it. Please leave my name intact.
What is it?
-----------
PORTStatus V5.1 [08-APR-1996] PostCard Ware. Add this ARexx program to
your sys.welcome and let users know the STATUS of their port. ie. UDBase
Open/Closed, Base Open/Closed, PFiles Open/Closed, Sysop Available or Not,
and if NEW USERS are being taken or Not. Plus other logon information.
This program is port speciffic so users will only see the settings that
you have set for the port they call in on. This program does NOT read or
write to any files so it should be very multitasking friendly. Now has
config file and sysop menu options.
As always, Use at your own risk. It works great here but may bomb
elsewhere.
Installation:
-------------
5.1 Note: As of the writting of this version, CNet 4.07 has been released
for general BETA/GAMA testing with 4.06 GAMA still running on
Future World. The good is... PORTStatus *IS* 4.x TESTED and is
fully usable! Hehe, whew... What luck:)
1. Unarch the program :) Lets hope this part is already done.
2. Move the PORTStatus.rexx program to PFiles (or anywhere)
3. Add this line to your sys.welcome file:
{#0PFiles:PORTStatus.rexx}
^
Remember that the { is a CTRL-Q character
4. Save :)
Thats it! Simple.
Operation:
----------
The operation is straight forward. A non-sysop (<31) will be shown a set
of BASIC user information and the status of the port they have logged
onto. The Port information that is shown may be edited by the sysop.
Sysop's (31+) can enter a sysop menu that gives them access to view the
status of their ports.
This should greatly help sysop's that run large multi line systems.
Before, to check all of your ports you would have to highlight the port
number on the CNet control and then go to the pulldown menu to see the
settings and then do this again and again for all your ports. Now you can
select the ALL option, turn on your capture, and have a full listing of
the status of all your port settings. Added a break to the longer listing
sysop functions. ie. During the list ALL and list RANGE the sysop can now
exit the listing at anytime buy just typing x. This will take you back to
the sysopmenu.
You may now use CNet's own PARSING system when viewing ports. You also
now have the option of skipping Unloaded ports for all range selections.
Sysop Program Options:
----------------------
xa=1 Show SysOp Status? (0=NO/1=YES)
xb=1 Show NEW USER Status? (0=NO/1=YES)
xc=1 Show File Area Status? (0=NO/1=YES)
xd=1 Show Game Area Status? (0=NO/1=YES)
xe=1 Show Base Area Status? (0=NO/1=YES)
xf=31 Access level of Sysop
xg=0 User option to view port information 0=Force View/1=User Picks
Registered Users so far...
--------------------------
NAME LOCATION BBS NAME/NUMBER
David Weeks (Dotoran) Buffalo, NY Frontiers 716-823-9892
SG Note: Thanks Dotoran for all the help, Advice, and the CNetToolKit :)